Maintenance and safe use of the winch grinder In order to maintain the normal operation of the winch grinder and extend the service life of the winch grinder, it is necessary to strengthen the maintenance and upkeep of the winch grinder. The operator must understand the structure and performance of the entire machine and be proficient in its use.
. The allowable load on the drum is kilograms at slow rotation, kilograms at fast rotation, kilograms at slow rotation, and kilograms at fast rotation. Overload operation is not allowed
. Lubricating oil must be maintained in the transmission gearbox. .
. In order to prevent gear jumping, spring steel balls are installed in the shift fork as a gear shift position.
When using the grinder, pay attention to check whether the spring steel balls are firmly pressed. If it is not firm, the spring must be replaced before use.
. For automatic brakes and interlocking brakes, the wear and tear of the bakelite should be checked frequently. The rotation and loosening clearance of the automatic brake gear is millimeters. If it is larger than millimeters, the bakelite must be replaced, otherwise it is easy to cause brake failure and cause an accident.
The automatic braking device is in the transmission gear box. When lifting, the automatic braking gear makes a click, click, click sound, which proves that the speed gear is working normally, but there is no such sound when it is loosened.
. The anchoring method of the machine base relies on the bearing supports (with two holes) on both sides of the drum as the anchoring point. Other positions cannot be used as the anchoring point.
. The locking pin of the reel bearing seat must match the corresponding hole. It is prohibited to use other screws instead of the locking pin.
. The casing of the transmission gearbox is made of aluminum alloy. The screws on it should not be too tight and should not be disassembled or assembled unnecessarily, let alone hammered.
After the grinding mill has been transported over a long distance, a detailed inspection must be carried out to see if the fastening screws of each component are loose and whether the lubricating oil is normal.
. The prime mover is a gasoline or diesel engine, which can be operated according to the operating specifications of the machine.
. Before each use of the machine, you should check whether there are any debris in the machine body and whether there are any obstacles around the machine that may affect the normal operation of the machine. At the same time, you should check each transmission mechanism. Only when everything is normal can you use it.
After each use of the grinding mill, dust, oil and other dirt on the machine should be removed in time, and all cleaners should do so.
Manufacturer contact number
News